Note location and position
of tie rod ends prior to
Both tie rod ends are
removed the same way.
Remove locknut (1) and screw (2) from
clamp. Discard locknut.
Remove tie rod end (3) from tie rod (4).
Do not perform Steps (3) and (4)
if tie rod end is lube for life.
These are permanently
lubricated, have no lube fitting
and dust cover is part of tie rod
Remove dust cover (5) from tie rod end (3).
Perform Step (4) if grease fitting
Remove grease fitting (6) from tie rod
Repeat Steps (1) through (4) for remaining
tie rod end (3).