|
| |
TM 9-2320-364-34-4
20-22
20-4. ELECTRONIC CONTROL MODULE (ECM) REMOVAL (CONT).
(41)
Remove nut (67), lockwasher (68), wire 1147 (69) and washer (70) from water temperature sending
unit (71). Reinstall washer (70) and nut (67) on water temperature sending unit (71). Discard lockwasher.
(42)
Remove water temperature sending unit (71) from left thermostat housing (72).
(43)
Remove nut (67), lockwasher (68), wire 1320 (73), washer (70) and washer (74) from water temperature
sending gage sensor (75). Reinstall washer (74), washer (70) and nut (67) on water temperature gage
sensor (75). Discard lockwasher.
NOTE
Connector is removed by gently prying up on tab and pulling connector out.
(44)
Disconnect MC61 connector (76).
(45)
Remove water temperature gage sensor (75) and fan control sensor (77) from left thermostat housing
(72).
(46)
Disconnect MC128 connector (78).
(47)
Remove temperature switch (79) from reducer bushing (80).
(48)
Remove reducer bushing (80) from left thermostat housing (72).
|
