|
| |
TM 9-2320-364-34-4
25-128
25-22. AXLE NO. 3 LOCKING CYLINDER REPLACEMENT (CONT).
(19)
Remove screw (1) and washer (2) from
locking cylinder (4).
(20)
Determine shim (3) thickness as follows:
Measurement “A” – 0.004 to 0.020 in.
(0.102 to 0.508 mm).
NOTE
Shim thickness was determined
in Step (20).
(21)
Install shim (3), washer (2) and screw (1)
to locking cylinder (4). Tighten screw to
25 to 32 lb-ft (34 to 43 N.m).
(22)
Remove air supply hose from locking
cylinder (4).
c.
Follow-On Maintenance.
Install brake assembly, (Para 25-21).
END OF TASK
|
