25-28. AXLE NO. 3 DIFFERENTIAL ASSEMBLY REPAIR (CONT).
Remove screw (52) and nut lock plate (53)
from bearing cap (54).
Loosen screws so adjusting nut
may be loosened. If screws are
loosened too much, adjusting
nut may be forced sideways,
stripping threads of adjusting
nut and bearing cap.
Partially loosen two screws (55) so adjusting
nut (56) may be loosened.
Loosen adjusting nut (56) until it moves
Bearing caps are part of a
matched assembly with the
differential housing assembly.
Remove four screws (55), two bearing
caps (54) and adjusting nut (56).
Perform Step (46) if locating
pins are damaged.
Remove four locating pins (57) from