Quantcast Using a mallet

Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Using a mallet
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Using spanner socket
Up
TM-9-2320-364-34-4 Palletized Load System (PLS) M1074/M1075 Manual
Next
Install taper bearings
TM 9-2320-364-34-4 25-170 25-28.  AXLE NO. 3 DIFFERENTIAL ASSEMBLY REPAIR (CONT). NOTE Perform Step (66) if bushing was removed. (66) Using press, install brass bushing (43) into input shaft (42). (67) Using a mallet, tap input shaft (42) into planetary gear assembly (40). Use care when installing retaining rings.  Retaining rings are under tension and can act as projectiles when released causing injury to personnel. (68) Install retaining ring (41) on input shaft (42). (69) Install planet gear carrier assembly (40) in ring and pinion assembly (38). (70) Install ring gear carrier (39) in ring and pinion assembly (38). Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors and are harmful to skin and clothing.  To avoid injury or death, keep away from open fire and use in a well- ventilated area.  If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. (71) Coat threads of six screws (36) with sealing compound. (72) Install three sectors (37) using six screws (36).  Tighten screws to 120 lb-in (14 N.m).

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc.