25-28. AXLE NO. 3 DIFFERENTIAL ASSEMBLY REPAIR (CONT).
Install adjusting shim (31) in front housing
Install bearing race (30) in front
Install pipe (29) in front housing (25).
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Coat opening in front housing (25) where
pipe (29) extends with sealing compound.
Coat threads of two screws (27) with sealing
Install deflector (28) in front housing (25)
with two screws (27). Tighten screws to 120
lb-in (14 N.m).
Coat mating surface of housing (26) with
Coat threads of 20 screws (24) with sealing
Front housing weighs 90 lbs
(41 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
Attach lifting device to front housing (25).
Install front housing (25) on housing (26) with
20 screws (24). Tighten screws to 80 lb-ft
Remove lifting device from front housing.