Install fork (5) with fork pin (8). Stake fork
pin on largest diameter end.
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply adhesive to both ends of fork pin (8)
to seal fork pin.
Install two finger forks (7) in fork (5).
Use care when installing
retaining rings. Retaining rings
are under tension and can act as
projectiles when released
causing injury to personnel.
Install clutch gear (6) on fork (5) using
retaining ring (4).