|
| |
25-191
(4)
The new adjusting shim (47) thickness will
be: Step (1) distance – Step (2) distance =
amount of shim thickness to be added to old
adjusting shim thickness to create new
adjusting shim. Proceed to Step (6).
(5)
The new adjusting shim (47) thickness will
be: Step (2) distance – Step (1) distance =
amount of shim thickness to be removed
from old adjusting shim thickness to create
new adjusting shim. Proceed to Step (6).
(6)
Assemble adjusting shim (47) to thickness
determined in Steps (1) through (5).
(7)
Assemble adjusting shim (45) thickness by
applying same change of thickness applied to
adjusting shim (47).
(8)
Install bearing race (49) in housing
assembly (15).
(9)
Install bearing race (48) in housing
assembly (15).
(10)
Install taper bearing (46) on pinion shaft (3).
|
