Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and
are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use
in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing,
wash immediately with soap and water.
Coat mating surface of housing assembly (15) with sealing compound.
Coat threads of screws (14) with sealing compound.
Install front housing (13) on housing assembly (15) with screws (14). Tighten screws to 44 lb-ft (60
Coat bearing race (16) with grease.
Install bearing race (16) in front housing (13).
Using depth gage, measure and record distance A on front housing (13).
Using depth gage, measure and record distance B on cover (11).
Assemble adjusting shim (12) to a thickness of A B ± 0.002 in. (0.051 mm).
Install adjusting shim (12) in front housing (13).