|
| |
TM 9-2320-364-34-4
27-13
(11)
Position drain pan under gear housing (1).
(12)
Remove and discard valve (15) and
preformed packing (16) from cylinder
head (4).
(13)
Remove 10 screws (17), lockwashers (18)
and cylinder head (4) from gear housing
(1). Discard lockwashers.
(14)
Remove and discard preformed packing
(19) from cylinder head (4).
(15)
Remove and discard valve (20) and
preformed packing (21) from bearing
cap (3).
(16)
Remove 10 screws (17), lockwashers (18),
bearing cap (3) and piston (22) from gear
housing (1). Discard lockwashers.
(17)
Remove and discard preformed packing
(23) from bearing cap (3).
(18)
Turn bearing cap (3) counterclockwise to
remove actuating shaft (24) from
piston (22).
NOTE
Perform Step (19) only if grease
fitting is damaged.
(19)
Remove grease fitting (25) from bearing
cap (3).
(20)
Remove valve (26) and preformed
packing (27) from piston (22). Discard
preformed packing.
|
