Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury, or death to personnel may occur.
(1) Set multimeter select switch to ohms.
(2) Is continuity measured between
ground side of taillight socket
and a known good ground?
(a) If there is no continuity, replace
composite light (Para 4-29).
(b) If there is continuity, Fault not
corrected. Perform Step (3) below
and notify supervisor.
(3) Install taillight lamp.
(4) Install preformed packing, composite
light cover and tighten six captive