Installation. -725550635

TM 9-2330-385-14

(g)

Remove locknut (6), two locknuts (12),

two washers (13), mounts (14), lens

support (3) and mounts (15) from

frame (16). Discard mounts and

locknuts.

(h)

Remove two screws (9) and

locknuts (6) from lens support (3).

Discard locknuts.

1/4 IN.

(6.35 MM)

AFTER

TIGHTENING

(2)

Installation.

(a)

Install two locknuts (6), mounts (15), lens support (3), two screws (9), mounts (14), washers (13),

locknut (6) and two locknuts (12) on frame (16).

(b)

Tighten locknuts (6) and (12) until two mounts (15) and (14) are compressed to 1/4 in. (6.35 mm).

4-343