4-28.1. REAR CENTER LED MARKER LIGHTS/BRACKET REPLACEMENT
(S/N YB6122 075 AND UP).
This task covers:
c. Follow-On Maintenance
Tools and Special Tools
Materials/Parts - Continued
Tool Kit, General Mechanic's: Automotive
Lockwasher (4) (Item 51, Appendix I)
(Item 50, Appendix J)
Wheels chocked, (Para 2-20)
Cable Ties (Item 8, Appendix E)
Intervehicular power cable disconnected,
Tags, Identification (Item 23, Appendix E)
Locknut (6) (Item 38.1, Appendix I)
If only replacing LED, perform steps (1) through (3).
Tag and mark all wires before removal.
Remove cable ties as required.
All three lights removed same way.
Remove two screws (1) and outer bracket (2) from mounting base (3).
Remove LED (4) from mounting base (3) by turning LED 1/4 turn counter-clockwise.
Disconnect pigtail (5) from LED (4).