When checking the position of
the clevis, be certain that your
line of sight is square to the
clevis and template to get an
Adjustment. Check position of clevis (1) with
template (2) by aligning camshaft hole (3) on
template with camshaft (4) and large clevis pin
hole (5) on template with the large clevis pin (6).
When these two holes are aligned, the small pin
(7) in clevis should be completely visible in slot
(8) in template.
Uncage brakes, (Para 2-16).
Adjust brakes, (Para 4-34).
Remove wheel chocks, (Para 2-20).
END OF TASK