INVERSION VALVE REPLACEMENT.

TM 9-2330-385-14

4-49. INVERSION VALVE REPLACEMENT.

This task covers:

a. Removal

c. Installation

b. Cleaning/Inspection

d. Follow-On Maintenance

INITIAL SETUP

Tools and Special Tools

Equipment Condition

Tool Kit, General Mechanic's: Automotive

Wheels chocked, (Para 2-20)

Drawbar lowered, (Para 2-23)

Cap and Plug Set (Item 2, Appendix J)

Air system drained, (Para 2-21)

Materials/Parts

Sealing Compound (Item 19, Appendix E)

Tags, Identification (Item 23, Appendix E)

Lockwasher (2) (Item 52, Appendix I)

Removal.

Equipment may be damaged by foreign matter if hoses, tubes, and connectors are not plugged

and capped when removed.

NOTE

Tag all air lines prior to removal.

Cap and plug all air lines and connectors after removal.

(1)

Remove air lines 2224 (1), 2226 (2) and 2223 (3) from elbows (4), (5) and (6).

(2)

Remove air lines 2225 (7) and 2231 (8) from tee fitting (9).

(3)

Remove two screws (10), lockwashers (11) and inversion valve (12) from frame (13). Discard lockwashers.