4-58. WHEEL BEARING (SERVICE) AND HUB REPLACEMENT (CONT).
Adhesives, solvents and sealing
compounds can burn easily, can
give off harmful vapors and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Perform Steps (7) through (11) for
spindle mounted seals.
Apply a thin coat of sealing compound
around wiper ring collar (17).
Ensure wiper ring is installed
evenly on wiper ring collar.
Failure to comply may result in
damage to equipment.
Using soft face hammer and brass drift,
tap evenly around base of wiper ring (15)
and install wiper ring (15) on wiper ring
collar (17) until edge is flush with spindle