Reflector Bracket Replacement.
Both brackets are removed and installed the same way.
Removal. Remove two locknuts (1), screws (2) and mounting bracket (3) from trailer (4). Discard
Installation. Install mounting bracket (3) on frame (4) with two screws (2) and locknuts (1).
Data Plate Replacement.
Number of rivets may vary depending on which data plate is being replaced.
If data plate is secured with screws, proceed to Step (b).
Drill out pop rivets (1) and remove data plate (2) from trailer (3).
Remove screws (4) and data plate (2) from trailer (3). Discard screws.