 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2330-385-14
d.
Assembly.
(1)
Refer to Para 4-37 and install brake
chambers on axle (1).
(2)
Refer to Para 4-35 and install brakes on
axle (1).
e.
Installation.
Axle assembly weighs 1565 lbs
(710 kg). Attach suitable lifting
device prior to installation to
prevent possible injury to
personnel.
(1)
Position axle (15) on lifting device.
(2)
Using lifting device and the aid of an
assistant, position axle (15) under
springs (21).
(3)
Support axle (15) with jackstands.
NOTE
Tighten nuts only enough to
secure axle in place safely.
(4)
Install rubber stop (20), spring shoe cap (19),
two U-bolts (18), four lockwashers (17) and
four nuts (16) on spring (21) and left side of
axle (15).
(5)
Repeat Step (4) for the right side of
axle (15).
(6)
Refer to Para 5-16 and check axle alignment.
(7)
Once axle (15) is aligned, tighten nuts (16)
on right side of axle to 600 lb-ft (814 N.m).
(8)
Refer to Para 5-16 and recheck alignment.
5-39
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals