Assembly. (Cont) -725551026

TM 9-2330-385-14

5-21. DRAWBAR REPAIR (CONT).

NOTE

If tube assembly was replaced, perform Steps (6) and (7).

(6)

Install plate (10) on tube assembly (4) (Para 4-59).

(7)

Install drawbar lift handles (8) and tow ring (9) (Para 4-59).

Drawbar shaft weighs 187 lbs (85 kg). Attach a suitable lifting device prior to installation to

prevent possible injury to personnel.

(8)

Attach lifting device to tube assembly (4).

(9)

With the aid of an assistant, steady tube assembly (4) and install tube assembly (4) in drawbar structure (1).

(10)

Remove lifting device from tube assembly (4).

(11)

Install pin assembly (3) in tube assembly (4) with tube assembly in extended mode.

5-72