5-21. DRAWBAR REPAIR (CONT).
Drawbar weighs 425 lbs (193 kg),
(850 lbs (386 kg) with drawbar
extension, if equipped). Attach
suitable lifting device prior to
installation to prevent possible
injury to personnel.
Attach lifting device to drawbar
With the aid of an assistant, use lifting
device and raise drawbar (1) into position
against trailer frame.
Keep hands and fingers out of
spring pin hole or injury to
personnel may result.
Care should be taken, not to
drive bushings out of drawbar
Install drawbar (1) on trailer frame (17),
with four spacers (16), two pins (15),
washers (14) and castle nuts (13). Tighten
castle nuts to 35 lb-ft (47 N.m). Tighten to
next alignment slot.
Install two cotter pins (12) in pins (15).
Support drawbar structure (1) with