EXTENDED DRAWBAR/LIGHT BAR KIT INSTALLATION.

TM 9-2330-385-14

5-24. EXTENDED DRAWBAR/LIGHT BAR KIT INSTALLATION.

This task covers:

a. Installation

b. Follow-on Maintenance

INITIAL SETUP

Tools and Special Tools

Materials/Parts

Tool Kit, General Mechanic's: Automotive

Adhesive (Item 3, Appendix E)

Sealing Compound (Item 17, Appendix E)

Drill, Electric, Portable (Item 7, Appendix J)

Sealing Compound (Item 19.1, Appendix E)

Drill Set, Twist (Item 8, Appendix J)

Kit, Extended Drawbar/Light Bar

Jackstand (Item 24, Appendix J)

Locknut (2) (Item 42, Appendix I)

Lifting Device Minimum Capacity 850 lbs

(386 kg)

Wrench, Torque (0 to 600 lb-ft [0-813 N.m])

Equipment Condition

Wheels chocked, (Para 2-20)

Air system drained, (Para 2-21)

Personnel Required

Two

Installation.

Drawbar weighs 425 lbs (193 kg). Attach suitable lifting device prior to removal to prevent

possible injury to personnel.

NOTE

Extended drawbar/light bar kit is used for common bridge transport missions only. This kit

is not intended to be used during normal PLS operations.

Parts removed and not used for extended drawbar/light bar kit are required to convert trailer

back to original configuration.

(1)

Support drawbar assembly (1) in level position on jackstand.

(2)

Remove two locknuts (2), screws (3), and link couplings (4) from plate (5). Discard locknuts.

5-85