6-7. BRAKE DRUM REPAIR (CONT).
Be sure to read the instructions
on the use of the brake turning
equipment in your shop to
prevent possible injury or death
Install brake drum (1) on turning
Turn brake drums (1) as needed to obtain a
smooth clean finish, free of pits, grooves, or
Remove brake drum (1) from turning
Measure inside diameter of brake drum (1)
in at least three equally spaced points. If
measurement at any point exceeds 16-5/8 in.
(422.28 mm), replace drum.
Install brake drum, (Para 4-58).
Remove wheel chocks, (Para 2-20).
END OF TASK