The rounded edge of retainer
plates must be tight against the
turntable bearing. Each plate
must be aligned above the lower
plate on the turntable.
Refer to TC 9-237 and tack weld upper
retainer plates (14) to trailer.
Turntable and bearing weighs
840 lbs (381 kg). Attach a
suitable lifting device prior to
installation to prevent possible
injury to personnel.
Attach lifting device and four clevises to
Refer to a. Removal Steps (8) through (13)
and remove turntable (1). Discard locknuts.
Remove 12 locknuts (12) and screws (13)
from turntable bearing (9). Discard