6-8. TURNTABLE/BEARING REPLACEMENT (CONT).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in a well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Apply sealing compound on 12 screws (13).
Install turntable bearing (9) on turntable (1)
with 12 screws (13) and locknuts (12).
With the aid of an assistant, tighten twelve
locknuts (12) in sequence shown to 160
lb-ft (217 N.m).
With the aid of an assistant, retighten
twelve locknuts (12) in sequence shown to
212 lb-ft (287 N.m).
If removed, install grease fittings (11) on
turntable bearing (9).
Refer to Steps (6) through (11) and position
turntable on trailer frame.