Table F-2. Hose Assemblies

TM 9-2330-385-14

Table F-2. Hose Assemblies

Hose Assembly

Bulk Hose

Cut-off

Part Number

Length in. (mm)

Fitting A

Fitting B

58989AX U-032

FC350-10

32 (813 mm)

Fitting 411-10S

58989AX U-036

FC350-10

36 (914 mm)

Fitting 411-10S

58989AX U-038

FC350-10

38 (965 mm)

Fitting 411-10S

F-3. WIRE ASSEMBLIES.

Fabricate from bulk wire stock listed in Table F-3. Using wire cutters cut a piece of 14 gage wire 6 in (152 mm) long.

Using wire stripper, strip back 1/4 in. (6 mm) of each end of wire. Cut two pieces of sealed heatshrink listed in Table

F-3, 3/4 in. (19 mm) long. Slide two pieces of sealed heatshrink over each end of wire. Using terminal crimpers,

install terminal ring (A) listed in Table F-3, on end of each wire. Using terminal crimpers, install terminal ring (B)

listed in Table F-3, on other end of wire. Slide one piece of sealed heatshrink to outside edge of crimped portion of

terminal ring (A). Make sure all bare wire is covered. Shrink sealed heatshrink with heat gun. Slide one piece of

sealed heatshrink to out side edge of crimped portion of terminal ring (B). Make sure all bare wire is covered. Shrink

sealed heatshrink with heat gun.

F-2