2-12. FLATRACK STACKING AND LOADING ON PLS TRAILER (CONT).
If additional flatracks will be loaded on trailer, go to Step (16). If not, go to Step (35).
Steps (16) through (18) are performed on flatrack located on trailer only.
Push up and turn handle (10) on two locks (11) to UNLOCK position as shown.
Remove pin (12) from extension (13) and rotate extension outward.
Install pin (12) to secure extension (13) in place.
Ensure lifting straps are wrapped a minimum of three times around ratchet of lifting strap.
Failure to comply may result in lifting strap being released and flatrack may fall causing severe
injury or death to personnel.
Attach one lifting strap (1) from left to right, to two front tiedown rings (3) on flatrack (14).