Table 7-1. Operator's Preventive Maintenance Checks and Services

TM 9-3990-206-14&P

Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued

Location

Item to

Item

Interval

Procedure

Not Fully Mission

Check/Service

No.

Capable If:

Roller must be supported while removing retaining pins or roller may drop

causing injury to personnel.

NOTE

Flatrack must be on truck prior to performing Item No. 7.

After

Two rollers

a. Hold roller (1) in place. Remove two

Either roller does not

safety pins (2) from retaining pins (3).

function correctly.

Lift roller (1) out far enough to ensure it is

removable, then push back in and install

safety pins. Perform same with other

roller.

b. Ensure that roller (1) will rotate.

After

Wooden flooring

Inspect wooden flooring (1) on flatrack

Any boards are missing

floor and rear wall for missing or

or broken.

damaged boards.

7-5