Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued
Not Fully Mission
Flatrack hook bar
Check hook bar for wear. If wear at lower Wear found exceeds
back side of hook bar is greater than 1/4
in. (6.35 mm) or greater than 1/8 in.
(3.175 mm) at bottom of hook bar, notify
Remove, clean and lubricate all front and
Tapered pin assembly
rear tapered pin assemblies (1). Refer to
does not operate or does
not operate freely.
CSC reinspection certification performed
Wear found exceeds
by certified CSC Inspector. Refer to
Appendix J for Container Inspection
Checklist. Also see Para 9-11 for
additional inspection criteria.