OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED

TB 9-2320-279-13&P-2

OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED

0009 00

LOCATION

ITEM TO

ITEM

CHECK/

NOT FULLY MISSION

NO.

INTERVAL

SERVICE

PROCEDURE

CAPABLE IF:

Side Armor a. Inspect side armor panels and door Any side armor panel or door assembly

Before

assembly for damage or loose or is damaged or mounting hardware is

(Left Side)

loose or missing.

missing mounting hardware.

b. Inspect exterior surface of door ballis- Pitting, cracks, or scratches exist in the

tic glass for pitting, cracks, or exterior layer of door ballistic glass and

penetrate through to the inner layer.

scratches.

c. Open door and enter cab. Close door Door binds or does not lock.

using grab handle. Lock door with

lock pin. Make sure door closes with-

out binding and locks correctly (WP

d. Ensure door ballistic glass can open, Door ballistic glass will not close or

close, and securely lock.

lock.

e. Inspect interior surface of door ballis- Pitting, cracks, or scratches exist on the

tic glass and windshield ballistic glass interior surface of the door ballistic

glass or windshield ballistic glass.

for pitting, cracks, or scratches.

f. If dirty, clean door ballistic glass (WP

REAR SIDE

ARMOR

FRONT SIDE

ARMOR

DOOR BALLISTIC

GLASS

DOOR ARMOR

417-042

0009 00-3