 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TB 9-2320-279-13&P-2
DOOR ASSEMBLY REPLACEMENT - CONTINUED
0015 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Door assembly weighs 310 lb (141 kg).
1.
If necessary, install two lifting links (13), washers (11), bolts (10), and new locknuts (12) on door assembly (1).
2.
Attach sling and lifting device to lift links (13) at top of door assembly (1). Take up slack in sling.
3.
Use lifting device to position door assembly (1) on hinge (17).
4.
Install 10 bolts (16), washers (15), and new locknuts (14) through hinge mounting holes on door assembly (1). Hand
tighten locknuts.
5.
Check alignment between door assembly (1) and cab opening. Adjust door assembly as necessary until alignment is cor-
rect.
6.
Tighten 10 locknuts (14) to 18 lb-ft (24 Nm).
7.
Remove sling and lifting device from lifting links (13).
1
13
10,11,12
14,15,16
17
417-047
0015 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals