 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TB 9-2320-279-13&P-2
RIGHT SIDE BLAST DEFLECTOR REPLACEMENT - CONTINUED
0027 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Side blast deflector weighs 145 lb (66 kg).
1.
Attach and secure lifting device under side blast deflector (11).
NOTE
Bolt lengths are not the same. Tag bolts to ensure correct installation.
2.
Remove three locknuts (3), washers (4), bolts (5), and washers (6) from front of side blast deflector (11). Discard lock-
nuts.
3.
Remove three locknuts (7), washers (8), bolts (9), and washers (10) from front of side blast deflector (11). Discard lock-
nuts.
4.
Remove four bolts (1) and washers (2) from rear of side blast deflector (11).
5.
Use lifting device to remove side blast deflector (11) from under vehicle.
1,2
7,8,9,10
3,4,5,6
11
394-134
0027 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals