 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TB 9-2320-364-13&P-2
LOWER BRUSH GUARD REPLACEMENT - CONTINUED
0019 00
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may cause injury.
NOTE
Access cover assembly weighs 31 lb (14 kg).
1.
Remove six locknuts (1), washers (2), and access cover assembly (4) from lower brush guard (3). Discard locknuts.
3
2
1
4
417-021
2.
Remove 15 locknuts (9), washers (10), bolts (7), and washers (8) from bottom edge of lower brush guard (3).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
IED front panels weigh 60 lb (27 kg) each.
3.
Using assistance, remove six locknuts (14) and washers (15), eight bolts (12), washers (11), and two IED panels (13)
from lower brush guard (3). Discard locknuts.
0019 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals