|
|
TB 9-2320-364-13&P-2
HEADLIGHT AND COMPOSITE LIGHT REPLACEMENT - CONTINUED
0020 00
REMOVAL (CONFIGURATION B)
NOTE
The following procedure covers both left and right headlight assemblies (Configuration B).
Right headlight assembly (Configuration B) is illustrated.
1.
Tag and disconnect jumper harness connectors (8) from headlight (1) and composite light (29).
2.
Remove three locknuts (7), washers (6), and headlight (1) from headlight bracket (5). Discard locknuts.
3.
Remove five locknuts (22), washers (23), bolts (28), washers (27), and headlight adapter (26) with composite light (29)
from headlight bracket (5). Discard locknuts.
4.
Remove two bolts (24), washers (25), and composite light (29) from headlight adapter (26).
5.
On right side only, remove four locknuts (11), washers (12), bolts (18), washers (17), and weight classification marker
(2) from headlight bracket (5). Discard locknuts.
6.
Remove two locknuts (10), washers (9), bolts (3), and washers (4) from top of headlight bracket (5). Discard locknuts.
7.
Remove three locknuts (16) and washers (15) from bottom of headlight bracket (5). Discard locknuts.
8.
Remove headlight bracket (5) from lower brush guard.
10
9
8
67
5
4
1
3
11
12
4
2
22
24
23
25
3
26
28 27
15
16
29
17,18
CONFIGURATION B
417-027
0020 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |