DRAFT
TB 9-2320-364-13&P-1
AC HEATER/EVAPORATOR REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC150
4. Coat four grommets (42 and 43) with soap solution.
CAUTION
Ensure that grommets are not dislodged during installation of heater/evaporator. If
grommets are not positioned properly flanges and drain hoses could be damaged.
5. With the aid of an assistant, position two flanges (13) through grommets (42) and drain hoses (45)
through grommets (43) while positioning lower plenum (46) on heater/evaporator (20).
PLSAC147
6. Install heater/evaporator (20) in cab (41) with six lockwashers (40) and screws (39).
0037-11