DRAFT
TB 9-2320-364-13&P-1
AC HOSES REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC136
NOTE
Wheel chocks and wooden blocks are placed on top of battery box cover to aid in
positioning of condenser to access AC hose.
If wheel chocks are not available, use similar size material to support condenser. Support
needs to be approximately 5.75 by 15.5 by 15.5 in.
4. Position two wheel chocks (9) on top of battery box cover (10).
NOTE
Wooden blocks used in Step 5 should be 2 by 4 by 16 in.
5. Position two wooden blocks (11) on top of two wheel chocks (9).
WARNING
AC condenser assembly weighs 75 lbs. (34 kg). Do not lift AC condenser assembly
without the aid of an assistant. Failure to comply may result in injury to personnel
and/or damage to equipment.
NOTE
After being removed from condenser mounting bracket, condenser will be positioned on
top of two wooden blocks that were installed in Step 5.
6. With the aid of an assistant, remove four screws (12) and condenser (13) from condenser mounting
bracket (14).
0039-12