|
| |
TM 9-2320-364-10
3-82
3-8. AIR WRENCH OPERATION (CONT).
NOTE
Regulator should be adjusted full counterclockwise for
wheel replacing procedures.
(6)
Adjust air regulator (7) full counterclockwise.
NOTE
If tightening a nut, press trigger until socket no longer rotates.
If loosening a nut, release trigger when nut is removed from
stud.
(7)
Position socket (5) squarely on nut (8) and press trigger (9).
(8)
Remove socket (5) from nut (8).
(9)
Shut OFF engine (Para 2-23).
(10)
Remove socket (5) from air wrench (4).
(11)
Remove air hose (2) from air wrench (4).
|
