|
| |
TM 9-2320-364-10
G-31/(G-32 blank)
5. CONTAINER HANDLING UNIT.
NOTE
If the part does not purge clean lubricant, notify Unit
Maintenance.
a.
Purging of Lubricant. When using a grease gun, apply lubricant to the
fitting until clean lubricant squeezes out of part being lubricated.
b.
Lubrication Fittings. Lubricate fittings with a manual grease gun. Do
not use an air powered grease gun.
6. OIL CAN POINTS.
Lubricate pivot points every 1,500 mi. (2,414 km) or Semiannually. Lubricate more
often if usage is high.
|
