|
| |
TM 9-2320-364-10
2-36
2-3. LOCATION AND USE OF CONTROLS AND INDICATORS
(CONT).
Figure 2-15. Crane Remote Control Unit
Key
Control or Indicator
Function
1
SWING Control Lever
Moves crane clockwise and
counterclockwise.
TELESCOPE and HOIST control levers
should be operated at the same time or hook
block will contact boom tip and cause damage.
2
TELESCOPE Control Lever
Move TELESCOPE control lever to OUT
position to extend the boom. Move
TELESCOPE control lever to IN position to
retract the boom.
3
BOOM Control Lever
Raises and lowers the boom.
4
HOIST Control Lever
Reels in and pays out the cable.
5
REMOTE CONTROL UNIT
ON/OFF/EMERGENCY
STOP Switch
Supplies and shuts off electrical power to the
crane and controls truck engine speed from
REMOTE CONTROL UNIT. Also provides
crane EMERGENCY STOP/TRUCK IDLE
CONDITION.
6
REMOTE Hookup Wire
Outlet
Allows cable hookup between the crane and
remote.
|
