|
| |
TM 9-2320-364-10
2-74
Table 2-1. Operator’s Preventive Maintenance Checks
and Services (Before) - CONT.
Location
Item
No.
Interval
Item to
Check/
Service
Procedure
Not Fully Mission
Capable if:
Before performing the next step, ensure that no personnel are in front
of truck. Be ready to apply the service brake. Operator must remain
in cab while performing this check to prevent possible serious injury or
death to other personnel.
NOTE
Check trailer brake hand control only if a trailer is attached to the
truck and truck air lines are attached to trailer air lines or test will
not be correct.
Ensure air pressure is between 110 to 125 psi (758 to 861 kPa).
11
Before
Controls
and
Indicators -
Cont.
(x) Check operation of trailer
handbrake control (34).
(1) With engine at idle, apply
service brake pedal (27).
(2) Engage transmission range
selector to Drive (D).
|
