|
| |
TM 9-2320-364-10
2-132
Table 2-5. Operator’s Preventive Maintenance Checks
and Services (Monthly) - CONT.
Location
Item
No.
Interval
Item to
Check/
Service
Procedure
Not Fully Mission
Capable if:
Keep hands and feet away from outrigger jacks while operating
lever to avoid injury.
Always use outrigger jack control valve on the same side of the
truck as the outrigger jack being extended into outrigger pad or
serious injury or death may result.
NOTE
Crane will not operate unless outrigger jacks are firmly in place.
96
Monthly
Outrigger
Jacks - Cont.
(h) Move RH O/R JACK control
lever (8) to DOWN position and
lower outrigger jack cylinder (9)
until ball end firmly seats in
outrigger pad (4). Install retaining
pins (5). Check that outrigger jack
cylinder (9) comes down and
lowers to the pad until truck weight
is off suspension just enough so
tires still have firm contact with the
ground but do not bulge from
weight.
Outrigger jacks will
not extend.
|
