|
| |
TM 9-2320-364-10
2-134
Table 2-5. Operator’s Preventive Maintenance Checks
and Services (Monthly) - CONT.
Location
Item
No.
Interval
Item to
Check/
Service
Procedure
Not Fully Mission
Capable if:
Do not operate crane unless both outrigger jacks are properly set up.
Truck could turn over causing serious injury or death.
97
Monthly
Crane
Control
Levers
(a) Remove locking pin (1).
(b) Move HOIST control lever (2)
to DOWN position and lower hoist
cable (3) about 12 in. (305 mm).
Cable will not pay
out.
Care must be taken when disconnecting HOIST load hook from hook
block tiedown. A swinging hook block can cause serious injury or
death to personnel.
(c) Disconnect load hook (4) from
hook block tie down (5).
(d) Check load hook (4) for cracks.
Hook will have to be replaced if
cracked.
Hook is cracked.
|
