|
| |
TM 9-2320-364-10
2-147
Table 2-5. Operator’s Preventive Maintenance Checks
and Services (Monthly) - CONT.
Location
Item
No.
Interval
Item to
Check/
Service
Procedure
Not Fully Mission
Capable if:
99
Monthly
Crane
Remote
Controls -
(Cont).
(j) Move SWING control lever (9)
to CW position to turn boom (10)
clockwise. Be sure boom turns in
the clockwise direction.
Keep boom clear of all electrical lines and obstacles while operating
crane. Serious injury or death could result on contact.
Keep hook block at least two ft. (0.61 m) from end of boom. If
hook block hits end of boom it may damage cable or hook block and
crane will lose control functions. Wait six seconds for power to
return and check crane for damage.
Do not let cable become slack or cable may get tangled on drum.
(k) Move HOIST control
lever (11) to DOWN position to
pay out cable (12) approximately
two ft. (0.61 m). Move HOIST
control lever (11) to UP position to
take up cable (12).
|
