|
| |
TM 9-2320-364-10
2-184
2-19. ON-ROAD DRIVING PROCEDURES (CONT).
(12)
Set the TRANSFER CASE shift lever (6) to the appropriate range
(Para 2-17).
NOTE
CTIS may not engage properly if CTIS START switch is
pressed too quickly.
For a detailed explanation of the CTIS, refer to Para
2-24.
Allow time for CTIS adjustment.
(13)
Set the CTIS rotary selector switch (7) to the appropriate position. Press
and hold CTIS START switch (8) for approximately one second.
(14)
Check that the FUEL gage (9) shows enough fuel to complete mission.
(15)
Check that the OIL PRESS gage (10) reads 5 to 10 psi (34 to 69 kPa) during
idle or 40 to 60 psi (276 to 414 kPa) above idle.
(16)
Check that the TRANS TEMP (transmission temperature) gage (11) reads 180
to 220 degrees F (82 to 104 degrees C) after transmission has warmed up.
|
