|
| |
TM 9-2320-364-10
2-290
2-29. LOAD HANDLING SYSTEM (LHS) (CONT).
NOTE
It may be necessary to repeat Steps (19) through (21)
several times to clear hook arm from hook bar.
(20)
Move the joystick (1) to LOAD to allow top of lift-hook (10) to clear
hook-bar (8).
NOTE
Do not move truck forward more than 3 in. (76.2 mm) to
prevent flatrack from pulling away from stops.
(21)
Place transmission range selector (7) in Drive (D). Release service brake
pedal (9) and move truck forward approximately 3 in. (76.2 mm). Apply
service brake pedal (9).
(22)
Move the joystick (1) to UNLOAD to disengage lift-hook (10) from
hook-bar (8).
(23)
Set transmission range selector (7) to Neutral (N) and apply truck parking
brakes (13).
|
