|
| |
TM 9-2320-364-10
2-293
Never drive with NO TRANS light illuminated. An
illuminated light means LHS is not fully stowed. The load
could brake loose causing serious injury or death to personnel.
Engine speed must be at idle before using hydraulic selector
switch or damage to equipment may result.
NOTE
Hook arm does not need to be fully stowed if more
transfer operations are going to be made.
(31)
Turn the hydraulic selector switch (2) to AUTO.
(32)
Move the joystick (1) to LOAD and retract LHS until LHS NO TRANS
light (3) is extinguished.
Hydraulic selector switch must be in OFF position before
driving or hydraulic system can overheat causing damage to
equipment.
(33)
Turn hydraulic selector switch (2) to OFF.
|
