|
| |
TM 9-2320-364-10
2-298
2-29. LOAD HANDLING SYSTEM (LHS) (CONT).
(7)
Apply service brake pedal (9) and release parking brake (13).
(8)
Set transmission range selector (7) to Reverse (R), release service brake
pedal (9), and back truck up until lift-hook (10) contacts hook-bar (8).
(9)
Set the transmission range selector (7) to Neutral (N) and apply truck
parking brake (13).
NOTE
Loading and unloading times are controlled by engine
speed. Engine speed can be increased to approximately
1500 rpm to reduce loading and unloading times.
(10)
Move joystick (1) to LOAD and engage lift-hook (10) into hook-bar (8).
(11)
Continue loading flatrack onto truck until the LHS NO TRANS light (3) is
extinguished indicating LHS is in transportation position.
(12)
Apply parking brake (13) and set the transmission range selector (7) to
Neutral (N).
|
