|
| |
TM 9-2320-364-10
2-304
2-29. LOAD HANDLING SYSTEM (LHS) (CONT).
(8)
If not aligned:
(a)
Move joystick (1) to LOAD.
(b)
When flatrack is completely reloaded onto truck, release joystick (1).
(c)
Repeat Steps (4) through (6).
To avoid equipment damage, visually check that hook arm
cylinders have fully extended.
To avoid equipment damage, ensure that hook arm cylinders do
not complete full extension while operating at engine speeds
above idle.
NOTE
Overload warning light will come on when hook arm
cylinders are fully extended and joystick is activated.
(9)
Move the joystick (1) to UNLOAD and hold until hook arm cylinders (15)
are fully extended.
|
