|
| |
TM 9-2320-364-10
2-316
2-29. LOAD HANDLING SYSTEM (LHS) (CONT).
To avoid equipment damage, visually check that hook arm
cylinders have completed full extension.
To avoid equipment damage, ensure that hook arm cylinders do
not complete full extension while operating at engine speeds
above idle.
Ensure rail transport locking pins are disengaged before
unloading flatrack. Rail transport locking pins are used for rail
transport only. Failure to comply may result in damage to
equipment.
NOTE
Overload warning light will come on when arm cylinders are
fully extended and joystick is activated.
The amount of time to load and unload is controlled by engine
speed. Engine speed can be increased to approximately 1500
rpm to reduce loading and unloading times.
(6)
Move the joystick (1) to UNLOAD and hold until hook arm cylinders (15)
are fully extended.
|
