|
| |
TM 9-2320-364-10
2-321
Engine speed must be at idle before using hydraulic selector
switch or damage to equipment may result.
(14)
Turn the hydraulic selector switch (2) to MAN H.A.
Never drive with NO TRANS light illuminated. An
illuminated light means LHS is not fully stowed. The load
could break loose causing serious personal injury or death to
personnel.
NOTE
Overload warning light will come on when hook arm
cylinders are fully extended and retracted and joystick is
being activated.
(15)
Hold the joystick (1) in LOAD position until hook arm cylinders (15) are
fully retracted.
|
