|
| |
TM 9-2320-364-10
2-331
k.
Unloading Flatrack With or Without Rollers Onto Dock Area or Bay (Not
Exceeding Truck Chassis Height).
Do not back up to loading docks in which the height of the
dock exceeds the height of bottom of the flatrack on the truck,
or damage to equipment may result.
NOTE
When loading or unloading flatrack from dock or bay
area, presence of rollers on rear of flatrack will aid in
operation. Procedure can be accomplished using hydraulic
selector switch in AUTO or MAN H.A. and MAN M.F.
operation. Refer to Para 2-29d and e for movement of
LHS in MANUAL mode.
(1)
Set the transmission range selector (7) to Reverse (R) and back truck to
dock. Stop truck when rear tires (25) are approximately 6 in. (15 cm) from
dock.
|
